Steel Stud & Track Rollforming Machines

Jobsite manufactures three different steel stud machines to allow the production of steel studs and tracks for use in wall, floor and roof framing.

  • PS600 produces studs & track from 2 1/2″ to 6″.
  • PS800 produces studs & track from 3 5/8″ to 8″.
  • PS1200 produces studs & track from 8″ to 12″.

PROFILE

Each machine roll forms various profile sizes. See chart above for specifications.

SPEED & EFFICIENCY

Producing at 75 feet per minute, this is the fastest machine on the market. The efficient flying punch allows material to keep moving while punching. The Flying punch allows for interchangeable tooling for different hole sizes and shapes. Maximum size is 1½” x 3½” ob-round.

RANGE OF MATERIALS

Like always Jobsite equipment is able to run a large range of materials. This machine is capable of rollforming heavy gauge steel from 24 to 14 gauge.

CONTROL AND ACCURACY

The PS Series steel stud machines are controlled by a Bosch Rex Roth touch screen control and driven by a servo motor main drive allowing precision accuracy and control. This state-of-the-art technology allows the user to easily program, via touch screen control, 1 piece to 10,000 pieces at lengths from 3” and up within an 1/16” accuracy.

SAFETY

Each machine comes equipped with sliding safety covers which will disengage the machine when opened. Also, emergency stop switches are located at each end.

DURABILITY

For long life, the machines are engineered with the highest structural integrity and all the forming rollers are Ion Nitrided 4130 hardened rollers.

FEATURES

  • Hydraulic (quick change cassette) shear
  • Bosh Rex Roth touch screen control
  • Material mist lubricant unit
  • Flying punch with interchangable tooling for different hole sizes and shapes. Maximum size is 1½” x 3½” obround.
  • Ion Nitrided 4130 hardened rollers
  • Internet connectable diagnostics

SPECIFICATIONS

  • Length: 245 Inches (6.22 m)*
  • Width: 44 Inches (1.12 m)*
  • Height: 65 Inches (1.65 m)*
  • Weight: 7,620 Pounds (3,457 kg)*
  • Main Power: 380/460 volt, 3 phase, 50/60 hz, 30 amp
  • Linear Drive Power: Electric servo/cycloidal gear drive
  • Hydraulic Power: 10 hp electric motor
  • Drive: 14 Forming Stations, 11 Driven by Chain
  • Speed: up to 75 Feet (22.86 meters) per Minute
  • Materials: 24 to 14 gauge steel

* Machine sizes vary. Call for exact specifications.

Jobsite PS600 Video